Lincoln Contractor Supply, Inc.
Wisconsin Inquiries
1 (800) 242-1255
Out-of-State Inquiries
1 (800) 236-1327
Your shopping MILWAUKEE SOUTH / WEST ALLIS
Your cart is empty
Site Navigation

VizCon 16028NSWB7 28" Enviro-Cone

VizCon 16028NSWB7 28" Enviro-Cone
Part #VIZ-16028NSWB7 Availability19

$15.09 / EA

VizCon 16028NSWB7 28" Orange Enviro-Cone

The Enviro-Cone is the future of traffic cones, it is MUTCD Compliant, 80% recycled by weight, and can be recycled again if the cone is damaged or destroyed. This saves you money and helps keep cones from entering the landfill. The Enviro-Cone is comprised of two parts, the cone stem and the cone base. If a cone stem becomes unusable, simply reorder the stem and reuse the base, no need to buy the entire cone again!

Manufactured from low density polyethylene, which provides superior cold weather performance and increases the life span of the Enviro-Cone when compared to PVC Cones. The Enviro-Cone does not crack or break down to -45°F. Even in the hottest weather, the Enviro-Cone stands tall and vertical. No more soft and droopy cones in hot weather! The Enviro-Cone provides long term durability with excellent color retention through the use of UV Stabilizers and low density polyethylene plastic. With more than 50% of the Enviro-Cone being made of recycled materials, it qualifies for Green Points.

With its patented Easy Grip Groove handle, the Enviro-Cone provides excellent "gription" for quick deployment and retrieval. The grove makes tying off caution tape quick and easy.

Specification
Orange traffic cone is 28" in height and have a total weight of 7 lbs. ± ¼ lb. Stem of the cone shall be molded from LDPE to provide superior cold/hot weather performance, excellent 100% UV resistance/color retention, and superior impact performance. Base of the cone shall be molded from recyclable rubber and make up 80% of the total weight. Dimensions of the base are to be 15 ¾" × 15 ¾". Cone base shall be removable so that the stem can be replaced. Base will lock onto the stem with molded-in locking lugs on the stem. The stem of the cone shall have a groove near the top of the cone for easy gription. Tipping angle of the cone shall be no less than 76° from vertical. The stem and base of the traffic cone shall be made in the USA.

VizCon 16028NSWB7 28" Enviro-Cone

VizCon 16028NSWB7 28" Enviro-Cone
Part #VIZ-16028NSWB7 Availability19

$15.09 / EA

VizCon 16028NSWB7 28" Orange Enviro-Cone

The Enviro-Cone is the future of traffic cones, it is MUTCD Compliant, 80% recycled by weight, and can be recycled again if the cone is damaged or destroyed. This saves you money and helps keep cones from entering the landfill. The Enviro-Cone is comprised of two parts, the cone stem and the cone base. If a cone stem becomes unusable, simply reorder the stem and reuse the base, no need to buy the entire cone again!

Manufactured from low density polyethylene, which provides superior cold weather performance and increases the life span of the Enviro-Cone when compared to PVC Cones. The Enviro-Cone does not crack or break down to -45°F. Even in the hottest weather, the Enviro-Cone stands tall and vertical. No more soft and droopy cones in hot weather! The Enviro-Cone provides long term durability with excellent color retention through the use of UV Stabilizers and low density polyethylene plastic. With more than 50% of the Enviro-Cone being made of recycled materials, it qualifies for Green Points.

With its patented Easy Grip Groove handle, the Enviro-Cone provides excellent "gription" for quick deployment and retrieval. The grove makes tying off caution tape quick and easy.

Specification
Orange traffic cone is 28" in height and have a total weight of 7 lbs. ± ¼ lb. Stem of the cone shall be molded from LDPE to provide superior cold/hot weather performance, excellent 100% UV resistance/color retention, and superior impact performance. Base of the cone shall be molded from recyclable rubber and make up 80% of the total weight. Dimensions of the base are to be 15 ¾" × 15 ¾". Cone base shall be removable so that the stem can be replaced. Base will lock onto the stem with molded-in locking lugs on the stem. The stem of the cone shall have a groove near the top of the cone for easy gription. Tipping angle of the cone shall be no less than 76° from vertical. The stem and base of the traffic cone shall be made in the USA.